The maximum number of products that can be compared is 4. Please refine your selection.
Multipurpose Adhesives
Shop By Category
Results 1Â - 10 of 10 in Multipurpose Adhesives
-
Product Code: 7101269
- Materials to be glued must be clean, dry and free from dust and grease
- Open the integrated cap, position the roller on the material you want to bond and pull it back while you press down
- The glue is applied with gentle pressure and the soft, extra wide waltz ensures an even contact pressure and therefore a better application
- Immediately put together the two parts to be glued
- A loose tape can be retightened by adjusting the tape tightening screw
- UHU GLUE ROLLER can be easily washed out with cold water
- Store in a dry, cool and frost-free place
- This pack includes 1 UHU Glue Roller in a handy blister pack
- OEM: 33-50465
-
Product Code: 7101271
- Do not use at temperatures below +5C
- Materials to be glued must be clean, dry and free of dust and grease
- For non-absorbent materials (e.g. ceramic, coated papers), apply to both sides of the assembly, leave to dry, re-apply and press the parts together
- Contains volatile, highly inflammable solvents
- Appropriate precautions should therefore be taken during storage or when working with the adhesive
- Stains/residue
- Remove wet glue stains immediately
- Dried glue residue and glue stains in clothing can be removed with acetone
- Storage conditions: Store in a dry, cool and frost-free place
- box for easy storage
- This pack includes 1 UHU All Purpose Adhesive Liquid 125ml in a handy box for easy storage
- OEM: 33-41815
-
Product Code: 7101275
- Suitable for assembling all kinds of (building) materials such as wood, stone, concrete, metal, many synthetics and polystyrene foam porous onto (porous) surfaces of stone, concrete, wood, plaster, drywall, etc
- Also very suitable for surface bonding, it improves the initial bond strength
- Very suitable for mounting timber framework, skirting boards, doorsteps, laths (wood / plastic), panelling, window sills, ceramic tiles, construction boards, drywalls, wood strips, wall covering sheets, panels, insulation, soft and hardboard, panels, sills, nameplates , house numbers, suspension hooks, ducts, electrical outlets and electrical boxes
- Also suitable for decoration materials, such as ornaments and mouldings in plaster, polyurethane and polystyrene foam
- Only apply at temperatures between +5C and +40C
- Close container properly and store in a dry, cool and frost-freeplace
- OEM: 33-37580
-
Product Code: 7101276
- If possible, apply at room temperature
- Materials to be glued must be clean, dry and free of dust and grease
- Contains volatile, highly flammable solvents
- Respective safety measures are to be taken regarding processing and storage
- When gluing larger areas, please ensure that the work area is well ventilated
- To remove adhesive residues and clean tools, butanone (MEK), ethylacetate and thinner for nitrocellulose lacquer should be used
- Adhesive residues cannot be removed from soft PVC films
- Store in a dry, cool and frost-free place
- OEM: 33-37655
-
Product Code: 7101268
- Unique twist-applicator for glueing dots, lines and surfaces
- Formula 70% nature-based
- Solvent-free
- Soft and handy plastic bottle from 88% plant-based raw materials
- Dermatologically tested
- Washes out with soap
- Refillable
- This pack includes 1 UHU Solvent-Free Twist & Glue 35ml in a handy blister pack
- Working conditions: Do not use at temperatures below +5C
- Surface requirements: Materials to be glued must be clean, dry and free of dust and grease
- OEM: 33-40225
-
Product Code: 7101270
- Do not use at temperatures below +5C
- Materials to be glued must be clean, dry and free of dust and grease
- When glueing plastics or metal, better results can be obtained if the parts to be stuck together are slightly roughened first
- For non-absorbent materials (e.g. ceramic, coated papers), apply to both sides of the assembly, leave to dry, re-apply and press the parts together
- Stains/residue
- Remove wet glue stains immediately
- Dried glue residue and glue stains in clothing can be removed with acetone
- Storage conditions: Store in a dry, cool and frost-free place
- box for easy storage
- This pack includes 1 UHU All Purpose Adhesive Liquid 35ml in a handy box for easy storage
- OEM: 33-42875
-
Product Code: 7101272
- Do not use at temperatures below +5C
- Materials to be glued must be clean, dry and free of dust and grease
- Directions for use: Thoroughly clean the surfaces to be glued (dry and free of dust and grease)
- For non-absorbent materials (e.g. ceramic, coated papers), apply to both sides of the assembly, leave to dry, re-apply and press the parts together
- Stains/residue: Remove wet glue stains immediately
- Dried glue residue and glue stains in clothing can be removed with acetone
- Storage conditions: Store in a dry, cool and frost-free place
- This pack includes 1 UHU All Purpose Adhesive Gel 31ml in a handy box for easy storage
- OEM: 33-43435
-
Product Code: 7101267
- Unique twist-applicator for glueing dots, lines and surfaces
- Soft and handy plastic bottle
- Crystal-clear
- Fast drying
- Washes out at 60C
- Refillable
- This pack includes 1 UHU Twist & Glue 35ml in a handy blister pack
- OEM: 33-40230
-
Product Code: 7101274
- Use adhesive and parts to be bonded at room temperature only. The relative humidity must be below 65%. This is to avoid formation of bubbles in the final product. Once attached, adjustment is no longer possible. Always test on an (inconspicuous) part of the surface first
- Surfaces must be dry, clean, dust- and grease-free and a good fit. Clean and degrease the surfaces to be bonded for optimal results
- This pack includes 1 UHU Contact Liquid Glue 33ml in a handy blister pack
- OEM: 33-37625
-
Product Code: 7102131
- Type: Multipurpose Adhesive
- Chemical base: SMP Polymer
- Bonding technique: 1-sided application
- Colour: Transparent
- Consistency: Pasty
- Viscosity: Pasty (approx.)
- Solid matter: 100% (approx.)
- Density: 1.1 g/cm3 (approx.)
- Shrinkage: approx. 0%
- Storage conditions: At least 24 months after date of manufacture. Limited shelf life after opening, Store the well-sealed packaging in a dry, cool and frost-free place
- Handling time: 15 minutes (approx.)
- Drying/curing time: 4-24 hours. (approx.) This might vary, based on circumstances, like temperature and humidity
- Working conditions: The materials to be bonded must be clean, dry, free of dust and grease
- Size: 8g
- OEM: 33-36355
Multipurpose Adhesives